Linear Ceiling System

Product Details:

SPECIFICATIONSPanels: Square edge, 60mm/135mm/210mm wide, 15mm deep, lengthup to 3 mtr.Material: 0.45 /0.50mm Galvanized Steel & 0.50/0.65mm Aluminium TCT.Carrier: 20mm wide, 40mm deep of 0.50mm /0.60mm thick Black CoilCoated Galvanised Steel to hold panel in module of 75/150/225Perforation: 2mm dia 5mm pitch Diagonal pattern. 2mm dia 5mm pitchRegular Pattern.Paint finish: 55 microns thick powder coating on exposed surface or 25microns polyester coil coated over primer on visible surface with primercoat on rear side.Suspension: 4mm dia Galvanized Rod, height adjustment Spring Steel Bigclip, Panel coupler, GS/Aluminium Edge Profile 18mm (Horizontal) * 20mm(Vertical).

Product Details:

SPECIFICATIONS

Panels: Round edge, 60mm/ 135mm/ 210mm / 285mm wide, 15mm deep,

length up to 3 mtr.

Material: 0.45/0.50mm Galvanized Steel & 0.50/0.65mm Aluminium-TCT.

Flush Cap: 0.50mm Aluminium to be inserted in 16mm GAP between two 60R/

135R/210R/285R Panels.

Carrier: 20mm wide, 40mm deep of 0.50mm/0.60mm thick Black Coil Coated

Galvanised Steel to hold panel in module of 75/150/225/300 mm.

Perforation: 2mm dia 5mm pitch Diagonal pattern. 2mm dia 5mm pitch Regular

Pattern.

Paint finish: 55 microns thick powder coating on exposed surface or 25 microns

polyester coil coated over primer on visible surface with primer coat on rear

side.

Suspension: 4mm dia Galvanized Rod, height adjustment Spring Steel Big clip,

Panel coupler, GS/Aluminium Edge Profile 18mm (Horizontal) * 20mm (Vertical).

Product Details:

SPECIFICATIONSPanels: 150mm wide,17mm deep, length up to 5mtr. with interlockflange to give flush look.Material: 0.45/0.50mm Galvanized Steel & 0.65mm AluminiumTCT.Carrier: 34mm wide, 48mm deep of 0.60mm thick Black Coil CoatedGalvanised Steel to hold panel in module of 150mm.Paint finish: 55 microns thick powder coating on exposed surface or25 microns polyester coil coated over primer on visible surface withprimer coat on rear side.Suspension: T leveler, GS Suspension Angle, Panel coupler, CarrierCoupler, GS/Aluminium Edge Profile 18mm (Horizontal) * 20mm(Vertical) for interior use.